Location | Coal Mine, Bowen Basin, QLD Australia |
Service | Underground and CHPP Dust Suppression |
Products | GRT: ACTIVATE |
Duration | January 2019 – Ongoing |
Status | Live |
GRT: ACTIVATE – COAL MINING CASE STUDY
About the client
OUR client is a global renowned mining and resource organisation that owns large scale, underground and open-cut mines in central Queensland. The challenges they face underground and above ground differ, although the challenge has a commonality – how to best manage coal dust. In underground mining water is sprayed in order to prevent spark arrest, however performs quite badly in its secondary role as a dust suppressant. As it is conveyed, crushed, and eventually stockpiled, again water is typically used to wet the coal enough to prevent dust generation.
The client had several major concerns in relation to managing coal dust:
Why doesn’t water work?
Water and coal, particularly as fine dust, just don’t mix.
This is because water has a high surface tension and also the same surface charge as coal. So like the 2 positive ends of a magnet, water and coal dust repel each other.
When the dust is travelling at the high speeds associated with shearing and even crushing, it has not chance of interacting with the coal – and in fact can further exacerbate the situation by displacing the air in front of sprayed water causing it to swirl around.
We can’t change the nature of the coal – this is where GRT: ACTIVATE comes in.
WHAT IS GRT: ACTIVATE?
GRT: ACTIVATE is a concentrated additive developed and manufactured here in Australia that changes the surface tension and charge of the water so it not only easily envelops the dust particles, it actually attracts them into the droplet. This results in total sequestration of the coal dust in the water droplet, which simply then falls to the ground.
GRT: ACTIVATE is dosed into the water used for spark arrest and dust suppression at a dosage range of between 1:1000 and 1:5000 – dependant on the risk, speed, and state of the dust we are treating.
As GRT is dedicated in developing sustainable, environmentally friendly products, GRT: ACTIVATE is also safe, non-toxic, has a low carbon footprint and is biodegradable.
3rd PARTY VERIFICATION
As part of our development and verification of the product, one of Australia’s leading Universities (contact us to receive a copy of the report) undertook a range of tests to compare GRT: ACTIVATE with water, as well as a product manufactured overseas. This was to test the adsorption dynamics of the 2 products at the air-water interface ad their ability to enhance the capture of coal dust particles by water droplets. The testing included:
Effectiveness would be measured in speed of surface tension changes and capture and sequestration of coal dust. The results showed that GRT: ACTIVATE was up to twice as effective as the American product, and more than 12 times more effective than water alone.
QUANTITATIVE AND QUALITATIVE BENEFITS
These results in the laboratory, have also translated to the field. The product has been used on both the longwall and continuous mners, as well as in above ground crushing and processing applications.
KEY BENEFITS OF USING GRT: ACTIVATE and GRT Engineers.
Independent testing of the product shows a 2 to 5 times reduction in the level of respirable dust for operations using GRT: ACTIVATE.
As well as the measured reductions in respirable dust, the reduction observed visually in both underground and aboveground operations was an almost complete removal. Whilst visual dust is not often respirable, respirable dust is associated with it.
The use of GRT: ACTIVATE means that the amount of water used for dust suppression is actually doing its job. In addition, the expertise of our staff can assist you in tailoring your spray systems to the optimal use of product and water dependant on your sites’ coal type and water availability.
A term we borrow from the electrical systems for hazardous areas, GRT: ACTIVATE is also intrinsically safe – it is non-flammable and safe for workers to be in and around all day, everyday. GRT: ACTIVATE is derived from plant-based products grown here in Australia.
Reducing surface tension faster than any technology on the market, GRT: ACTIVATE also is non-corrosive and non-congealing so it will not impact on the durability or reliability of pumps and spray systems. In fact, it will also optimise mechanical means of suppressing dust such as fogging, by increasing the efficiency of the fogging process and preventing calcification at the nozzles.
GRT DOSING UNITS
A key part of the solution is the intrinsically safe dosing systems we have developed to accurately dose the product. These units can run off a variety of power sources, however, we have developed options that can run off of air or even the water feeding the longwall or continuous miners. GRT strives to deliver site-specific solutions for its clients – no matter the situation.
PROUDLY AUSTRALIAN-MADE:
GRT’s supply chains are secure as we produce our mining products in Australia.
We are proud to say this is both the case for GRT: ACTIVATE and our Automated Dosing Units.
Your feedback is important to us. If you enjoyed reading this Global Road Technology industry update and found it informative, please let us know by leaving a REVIEW.
Are environmental regulations, health and safety concerns or potential profit loss a concern right now?
Contact Us Now